RGXLED is a leading China Nova MRV366 Receiving Card manufacturers, suppliers and exporter. Adopts the Gigabit Ethernet port, which can connect to the PC.
RGXLED is China manufacturers & suppliers who mainly produces Nova MRV366 Receiving Card with many years of experience. Hope to build business relationship with you.
The MRV366 is a new receiving card developed. A single MRV366 loads up to 512x256 pixels.
The MRV366 supports pixel level brightness and chroma calibration, which effectively removes color difference, greatly improves display consistency of LED images, and presents finer displays to users.
Software and hardware designs of the MRV366 have fully concerned users'deployment, operating and maintenance scenarios, enabling easier deployment,more stable operating and more efficient maintenance.
Integrates 16 standard HUB75 connectors, which makes the HUB board unnecessary.
Adopts the Gigabit Ethernet port, which can connect to the PC.
Supports pixel level brightness and chroma calibration.
Supports setting of images pre-stored in the receiving card.
Supports status detection of temperature, voltage, Ethernet cable, Communication and video source signals.
This chapter illustrates safety of the MRV366 receiving card to ensure the product’s storage, transport, installation and use safety.
Safety instructions are applicable to all personnel who come into contact with or use the product. Please pay attention to following points.
Read through the instructions.
Retain all instructions.
Comply with all instructions.
Storage and Transport Safety
Pay attention to dust and water prevention.
Avoid long-term direct sunlight.
Do not place the product in a position near fire and heat.
Do not place the product in an area containing explosive materials.
Do not place the product in a strong electromagnetic environment.
Place the product in a stable position to prevent damage or personal injury caused by dropping.
Save the packing box and materials for future storage and shipping of product. For maximum protection during storage and shipping, repack the product as it was originally packed at the factory.
Installation and Use Safety
Only trained professionals may install the product.
Plugging and unplugging operations are prohibited when the power is on.
Ensure safe grounding of the product.
Always wear a wrist band and insulating gloves.
Do not place the product in an area that is frequently or strongly shaken.
Perform regular dust removal.
Rather than having the product disassembled and maintained by non-certified professionals, please contact NovaStar for maintenance at any time.
Replace faulty parts only with the spare parts supplied by NovaStar.
The MRV366 is a new receiving card developed by NovaStar. A single MRV366 loads up to 512×256 pixels.
The MRV366 supports pixel level brightness and chroma calibration, which effectively removes color discrepancies, greatly improves LED display image consistency, and presents finer displays to users.
On-site setup, operation, and maintenance were all taken into account when designing the hardware and software of the MRV366, allowing for an easier setup, more stable operation, and more efficient maintenance.
Hardware design:
Integrates 16 standard HUB75 connectors, which makes the HUB board unnecessary.
Adopts the Gigabit Ethernet port, which can connect to the PC. Software design:
Supports pixel level brightness and chroma calibration.
Supports setting of pre-stored image in the receiving card.
Supports status detection of temperature, voltage, Ethernet cable communication and video source signals.
Supports 5-pin LCD module.
Features |
Description |
Pixel level brightness and chroma calibration |
Brightness and chroma calibration in NovaLCT for each pixel can remove color discrepancies effectively, make the brightness and chroma of the whole screen highly consistent, and improve the display effect. |
Supports setting of pre- stored image in the receiving card. |
In NovaLCT, a specified image can be set as the LED screen startup image or as the image to be displayed on LED screen when the Ethernet cable is disconnected or no video source signal is available. |
Status detection of temperature, voltage, Ethernet cable communication and video source signals |
In NovaLCT, the status of receiving card's temperature, voltage, Ethernet cable communication and video source signals can be detected. |
Supports LCD module. |
Supports NovaStar's general 5-pin LCD module. The LCD module is connected to the HUB board to display temperature, voltage, single operating time and total operating time of the receiving card. |
Readback of configuration file |
In NovaLCT, the configuration information stored in the receiving card can be read back. |
Readback of firmware version |
In NovaLCT, the firmware versions of the receiving card can be read back. |
Appearance
Product images provided in this file are for reference only. Actual products may differ from image shown.
No. |
Description |
1 |
HUB75 connectors |
2 |
Power socket |
3 |
D1, status indicator |
4 |
D2, power indicator |
5 |
Power socket |
6 |
Gigabit Ethernet ports |
Dimensions
The board thickness is not greater than 2.0 mm, and the total thickness (board thickness + thickness of components on front and rear panels) is not greater than 17.5 mm.
The unit of dimension chart is “mm”. The location holes are connected to signal grounds (GND).
Indicators
Indicator |
Status |
Description |
Status indicator (green) |
Flashing every other 1s |
No sending card mode: The receiving card is functioning normally with no sending card connected. Ethernet cable connection is normal, and video source input is available. |
Flashing every other 0.5s |
Sending card mode: Both the receiving card and the sending card are functioning normally. Ethernet cable connection is normal, and video source input is available. |
|
Flashing every other 3s |
The receiving card is functioning normally, but the Ethernet cable connection is abnormal. |
|
Rapidly flashing for 3 times every other 3s |
The receiving card is functioning normally. Ethernet cable connection is normal, but no video source input is available. |
|
Rapidly flashing every other 0.2s |
Program loading fails in normal operating state, currently loading backup operating program. |
|
Power indicator (red) |
Always on |
It is always on after the power is on. |
Pin Definition
Pin Definition |
|||
GND |
16 |
15 |
HOE |
HLAT |
14 |
13 |
HDCLK |
HD |
12 |
11 |
HC |
HB |
10 |
9 |
HA |
HE |
8 |
7 |
B |
G |
6 |
5 |
R |
GND |
4 |
3 |
B |
G |
2 |
1 |
R |
Step 1 Visit www.novastar.tech to download the firmware update package and save it to PC.
Step 2 Run NovaLCT and choose User > Advanced Synchronous System User Login to log in.
Step 3 Type the secret code "admin" to enter the program loading page.
Step 4 Click Browse to select the program (the firmware update package you saved on PC) path and then click Update.
Step 5 (Optional) Click Refresh to check current hardware version information.
The MRV366 is applicable to the LED display synchronous system which is generally composed of the LED display, receiving card, LED display controller and controller peripherals. The receiving card is connected to the LED display over HUB connectors.
The synchronous system requires connecting a computer to display the computer’s images and texts on the LED display. The synchronous system's structure is shown in the following figure.
Figure 6-1 Sending card mode
Figure 6-2 No sending card mode
Electrical Parameters |
Input voltage |
DC 3.3 V–5.5 V |
Rated current |
0.5 A |
|
Rated power consumption |
2.5 W |
|
Operating Environment |
Temperature |
-20°C–70°C |
Humidity |
10% RH–90% RH |
|
Storage Environment |
Temperature |
-25°C–125°C |
Packing Information |
Packing standard |
An antistatic bag and anti-collision foam are provided for each receiving card. Each box contains 100 receiving cards. |
Packing box dimensions |
650.0 mm × 500.0 mm × 200.0 mm |
|
Dimensions |
145.6 mm × 91.5 mm × 17.2 mm |
|
Net Weight |
100.1 g |
|
Certifications |
RoHS, EMC Class A |