How to do a good job of moisture-proof protection and maintenance for the LED display?

How to do a good job of moisture-proof protection and maintenance for the LED display? Because the weather is often rainy or the room is not ventilated, there is a lot of water vapor in the air, and the vapor emission stays on the circuit board, which can easily cause mildew on the circuit board and lead to performance failures! Therefore, in order to ensure that the LED display can shine beautifully in the humid air, we must do regular lighting and maintenance to prolong the service life of the LED display! 

1. It is recommended to start and run at least twice a week, and the lighting time is about 2 hours.

2. The LED display is composed of individual lamp beads. If it is not used for a long time, it is very likely that bad lights and a large number of lamp beads will be damaged when it is activated again.

3. Especially in the rainy season, the humidity in the air is very high, and the water vapor adheres to the LED display device, which will cause the components to corrode and even be scrapped.

4. When the LED display is lit, it will generate heat, which can quickly evaporate the water vapor attached to the LED display, reduce the humidity of the indoor environment, and prolong the service life of the display.

5. When switching on and off the LED display, you should pay attention: turn on the screen first, then turn on the screen, turn off the screen first, and then turn off the screen.